1021 Underbody Protction Spray
Produces a perm. elastic, securely adherent underbody protective lining on a rubber/resin base, which reliably protects against corrosion, stone impact, road salt and moisture. For treatment of corners, edges, angles on motor vehicle floors and wheel arches. Especially suitable for treatment and repair work in difficult to access places.
Register now and access more than 400 products
Hazardous Material
Properties
Application area
Instructions
Shake can well before use. Layer thickness per work process approx. 1mm wet film (= 700 μm dry film). For repainting with "water-based paint systems" allow to dry for at least 3 hours per 500 μm dry film at 23°C / 55% humidity. For repainting with "solvent-containing paint systems" allow to dry for at least 20 minutes. The drying time is dependent on the ambient temperature / humidity and layer thickness After processing, spray dry the aerosol riser tube to prevent a blockage in the nozzle.
Notice
Contents | 500 ml |
Shelf life | 900 d |
