143 Cooling System Cleaner
Non-foaming, acid-free special cleaning agent with new, improved formula for modern high-performance cooling systems. Dissolves and binds oily residues, eliminates slime and corrosion deposits. Neutralises lime residues. A clean cooling system increases operational and functional safety.
Register now and access more than 400 products
Properties
Application area
Instructions
Allow warm cooling water to drain. Top up the cooler with fresh water and add MP 143. Set the heating valves to warm. Bring the engine up to operating temperature and leave it to run for approximately 30 minutes. Drain used cleaning fluid and flush with clean water. Add a fresh mix of anti-freeze and water. Avoid storing the product at temperatures below 0°C.
Dosing
500 ml is sufficient for 10 l
5 l is sufficient for 100 l
Notice
Product Description | Cooling System Cleaner |
Contents | 5 l |
Shelf life | 730 d |
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
