Welcome to TUNAP Benelux For trade customers only
915 Cleaner
915 Cleaner - 1 915 Cleaner - 2 915 Cleaner - 3 915 Cleaner - 4 915 Cleaner - 5 915 Cleaner - 6 915 Cleaner - 7
915 Cleaner - 1
915 Cleaner - 2
915 Cleaner - 3
915 Cleaner - 4
915 Cleaner - 5
915 Cleaner - 6
915 Cleaner - 7

For detailed information, other images and documents, please select individual articles from the following table.

915 Cleaner

N-hexane free cleaner for maintenance, repair and assembly work. Less harmful to users health. Removes dust, encrusted dirt, oil, grease, resin and corrosion protection layers.

See product details

Available in 2 versions

Show variants

Prices for customers after login

Exclusively for trade customers

Register now and access more than 400 products

  • Login/Register

  • Call customer service: NL +31 (0)8 58 88 06 72 | BE +32 (0)9 326 76 00

Hazardous Material

Variants

Exclusively for trade customers

Register now and access more than 400 products

Login/Register

Call customer service: NL +31 (0)8 58 88 06 72 | BE +32 (0)9 326 76 00

Prices for customers after login

TUN Solve® 3.0 Technology:


  • Spray stream, not spray mist

  • Lower explosion limit >1.5 Vol. %

  • No n-hexane or aromatics

  • High electrical resting conductivity, >1000 pS/m

  • Evaporation rate: 4.5


    • Properties


  • Outstanding cleaning performance with minimum risk potential

  • Reduced risk of fire and consequences of fire

  • State-of-the-art cleaner technology

  • Minimum risk potential

  • Recommended product in accordance with the German Ordinance on Hazardous Substances (protection level 2)


    • Application area


  • For maintenance, repair and assembly of components subject to oily and greasy residues and resin deposits

  • Effective against lacquer-type contaminants

  • For brake maintenance and repairs

  • For clutch repairs


    • Instructions


    Refer to the product information before use. Spray parts to be cleaned.
    If equipment and objects that have been cleaned with this product are to be used in the food processing industry, they must be thoroughly cleaned with drinking water before use.



    Notice


  • Do not apply to painted surfaces

  • For plastics, check compatibility on a concealed area

  • The use is limited to nonprocessing areas where there is no possibility of solvent vapors entering a processing area. Food processing equipment or utensils treated with such preparations must be washed with an acceptable detergent solution, and thoroughly rinsed with potable water before returning to a processing area.
    • Lowest risk level as defined in TRGS 600
    Improved cleaning performance in A1 quality
    Shorter flash-off time